Analysis of the Reasons for the Phase Loss of Three-Phase Asynchronous Motors

May 06, 2024

Analysis of the Reasons for the Phase Loss of Three-Phase Asynchronous Motors

The three-phase Asynchronous Motor runs out of phase, and the case of burning the motor sometimes occurs.

The main reason is that the reverse sequence magnetic field generates a large braking torque after one-phase power failure, which reduces the output torque of the motor. When the applied load is constant, the slip rate increases, and the current in the stator winding increases compared with the normal operation. A lot of, resulting in copper consumption, increased iron consumption, and as a result, the motor temperature rises to burn the stator windings.

In the daily use process, it was found that most of the three-phase heterogeneous motor lacked phase operation caused by human inadvertent causing the main power circuit and starting the electric appliance.

Analysis of the specific situation of single-phase operation of the motor

1. When the power supply and load are star connections, the line voltage is equal to √3 times the phase voltage, and the line current is equal to the phase current; when the power supply or one phase of the load is disconnected, the current is proportional to the load on the motor. .

2. When the motor is connected to △, the line voltage is equal to the phase voltage, and the line current is equal to √3 times the phase current; If the external (power supply) is disconnected, the motor is actually connected in series with the two-phase winding, and then connected in parallel with the third phase and then connected to the two-phase uninterrupted power supply line. The line current is equal to the sum of the parallel paths, and the load is constant. The current of the two phases is unchanged, the current of the third phase in parallel increases by 0.5 times, and the line current of the full load is 1.7-2.0 times of the rated current.

3. When the motor is connected to △, if the internal phase of the motor is disconnected, the motor becomes V-shaped, the phase current and the line current are proportional to the motor load, and the two-phase current is increased by 1.5 times, and the current of one phase is increased to 1.5 times, the current of the other two-phase line is increased by about 0.9 times.

Analysis of the specific situation of power supply power shortage

It accounts for a certain proportion of the proportion of the motor that produces phase loss, which is represented by: circuit breaker and fuse.

1. Circuit breaker: Many times the operator of the equipment likes to use the circuit breaker as a switch to stop the operation.

Circuit breakers are non-regular electrical equipment. If the load is pulled, and the type of protection motor is wrong, it is easy to produce phase loss.

2. Fuse: Faulty fuse, due to frequent positive and negative reversal of the motor, causing single phase grounding of the main circuit of the motor.

Non-faulty fuse, fuse fuse capacity selection is too small, the installation is not reasonable.

3. Contactors: the selection is unreasonable and the installation is unreasonable.

4. Thermal relay: the matching is not matched, the installation is not up to standard, and the debugging is not in place.

5. Quality reasons for the motor itself

The main performance is the poor connection of copper and aluminum, and the welding of the outer leads of the winding is poor.

HuataoElectric Motors included Ordinary Motors , Explosion-proof Motors, Variable Frequency Motors, High Voltage Motors, Wind Power Motors, Marine Motors.

Huatao Motors are widely used as Metallurgy mill roller drive. Plastic Film Roller and Industrial Rollers drive. They are equipped with excellent quality Bearings. We supply quality Gearboxes as well.

YE3 SERIES HIGH EFFICIENCY THREE PHASE ASYNCHRONOUS MOTOR

Author:

Mr. Jack Yang

E-mail:

Jack.y@huataogroup.com

Phone/WhatsApp:

+86 13315113775

Popular Products

Company News

Congratulation!! Huatao anilox roller get good feedback from UAE customer-RAK Packaging Company Limited.

October 29, 2024

What are the application characteristics of planetary gearbox for coal mining equipment?

August 17, 2024

Industry News

How to use the teflok roller correctly

October 19, 2024

Forop Advanced Materials Co.,Ltd' 18th German Bruckner world-leading film material production line (No. 2193 FAF) was officially put into operation in Fuqing Smart Industrial Park, Fujian

September 13, 2024

Blog News

Advantages of stainless steel rollers

May 11, 2024

Advantages and uses of mirror rollers

May 11, 2024

Huatao Group was founded in 2008. We are a professional and leading supplier of various rollers, motors, gearboxes, and rotary joints to the plastic & rubber, metallurgy, paper, corrugated board, printing & dyeing, and textile industries over 15 years of experience. With a strong commitment to innovation, reliability, and customer satisfaction, Huatao Group has become a trusted provider in the industry and our products have been exported to more than 96 countries and have a good reputation.. Products: Gearboxes: HUATAO offers a diverse range of gearboxes designed for various applications across industries. These gearboxes are known for their efficiency, durability, and precise power transmission. They are available in different types, including helical, bevel, worm, and planetary gearboxes, catering to the specific needs of customers. Motors: Huatao provides a comprehensive selection of motors suitable for a wide range of applications. Their motor offerings include electric motors, servo motors, and specialized motors for specific industries. These motors are known for their high performance, energy efficiency, and reliable operation. Ours motors are designed to meet the...

   

ABOUT

PRODUCTS

NEWSLETTER

Send Inquiry 

Links:

Links